CHIRP

The Yaesu FT60 Supports a number of non listed (in chirp) formats - the formats ARE in chirp, but not available.

Tone->DTCS
A cross mode of "Tone->DTCS" means that the radio will use a sub-audible tone for transmit, according to Memory.rtone, and a DCS code for receiver squelch. If the radio's feature set includes "has_rx_dtcs" then the value used in this case is Memory.rx_dtcs. Otherwise, use Memory.dtcs

DTCS->Tone
A cross mode of "DTCS->Tone" means that the radio will use a DCS code for transmit, according to Memory.dtcs, and a sub-audible tone for receiver squelch. If the radio's feature set includes "has_ctone" then the value used in this case is Memory.ctone. Otherwise, use Memory.rtone.

->Tone

->DTCS
A cross mode of "->DTCS" means that the radio will not transmit a sub-audible tone, but will enable DCS squelch on the receiver. If the radio's feature set includes "has_rx_dtcs" then the value used in this case is Memory.rx_dtcs. Otherwise, use Memory.dtcs.

DTCS->
A cross mode of "DTCS->" means that the radio will use a DCS code for transmit, according to Memory.dtcs. In this mode, the receiver is carrier squelch.

DTCS->DTCS

Attached file, Channel 1 is set up as D-TSQL: Receive CTCSS 173.8, Transmit DCS 371. Channel 2 is set up as T-DCS. Transmit CTCSS 173.8/ receive DCS 371. However when imported they show ERROR