Project

General

Profile

Actions

Bug #6677

closed

ft-65

Added by Angelo Marcone over 5 years ago. Updated over 4 years ago.

Status:
Closed
Priority:
Normal
Category:
-
Target version:
-
Start date:
04/09/2019
Due date:
% Done:

0%

Estimated time:
2:00 h
Chirp Version:
daily
Model affected:
Yaesu FT-65
Platform:
All
Debug Log:
I read the instructions above:

Description

Hi to Everyone,

I'm working with a Yaesu FT-65 and I did some check with chirp and original Yaesu SW.
It seems to me that CTCSS tone information read from the radio are not correct in chirp (the TONE type and the TONE value as well).

I manually stored VHF repeaters (R0, R1alfa, R2, ....R7alfa, split -600Khz for all) with 71.9 CTCSS tone enabled in TX to access these repeaters.
The original sw (in windows) read correctly the configuration, chirp (in linux enviroment) does not. Frequency values are OK.

Someone with the same problem?

Thanks and 73 from Italy.

Angelo IK8VRQ


Related issues 1 (0 open1 closed)

Related to Bug #7605: [Yaesu FT-4, FT-65, FT-25] Automatic duplex value selection not workingClosedBernhard Hailer01/24/2020

Actions
Actions

Also available in: Atom PDF