CHIRP

Please see "In case you ran into a problem with Chirp" on the chirp homepage.
Also see "How to report an issue":http://chirp.danplanet.com/projects/chirp/wiki/How_To_Report_Issues for information to include.
Please include a debug log from the session in which you experience the issue. I believe the driver for this radio has been developed recently. Would you be able to include an image img file?
I'm not familiar with that radio. Is there a setting that controls whether "duplex" frequency is stored as offset, or specific Tx freq.?
From reading your report, it is difficult to determine if your first step was to download an image from your radio. If not, please try that, and advise.

I think I've found the problem. Looking further in the manual (what there is of one), there is a reverse offset setting. If I manually turn it off, what had been sent to the HT works correctly. However, if I send the img file again, that setting gets turned back on.

Chirp doesn't have an option to change it (that I can find). Under Settings there is "LCD Backlight", "Mic Gain", "Dial Assignment" and "Display Type".

Interestingly, if I manually add a memory channel, download this to Chirp, and modify a setting for this channel, then send it to the HT, the setting will change but Rev Offset does not get turned on.

However, if I add a channel in Chirp (using the same img file), send it to the HT, Rev Offset gets turned on for that channel.

If I manually turn off Rev Offset, download this file into Chirp, modify the new channel in some way, and send it back, Rev Offset gets turned back on.

Good to know the reason. I assume the default will be "off" on each channel, unless the user explicitly sets one or more to on (forcing it off on all other channels if an updated upload is done)?

Thank you for your efforts at getting this resolved.

I'm having the same problem, waiting for the update.

I found a work around until the patch is completed. Only enter the downlink frequency, Set tone and duplex to none on each channel. Then after uploading to radio turn on the auto repeater function. Works like a champ.