Actions
Bug #8179
closedIcom IC-V86
Start date:
08/13/2020
Due date:
% Done:
100%
Estimated time:
Chirp Version:
daily
Model affected:
IC-V86
Platform:
All
I read the instructions above:
Description
Chirp seems to be sending the derived transmit freq (desired rec freq -/+ 600hz) rather than the receive freq to the handheld. For example, if 146.67 is entered for a channel and neg offset, 146.07 shows up on the handheld when the data is transfered.
If data is then downloaded from radio, Chirp shows a freq of 167.67. If the freq is manually entered on the radio and verified to be correct, then data is downloaded from radio, Chirp shows 146.67. If this is then sent to the radio, it will show 146.07.
If no offset is selected for the channel in Chirp, then the freq is correct on the radio, but then there is no offset.
Files
Actions