CHIRP

Please attach an image with a channel that does not work and a second image with the same channel that works.

Jim KC9HI

Everything will be for channel 5. I entered the freq (in VFO Mode) with an encode/decode PL of 100.0. Also checked the squelch setting (option 16) and it's set for CTCSS. Saved the freq into Memory. Double checked that it still worked in Memory Mode (also checked the other TSQL channels). Downloaded the channels into Chirp. Saved and overwrote the old .img file. With no changes to Chirp, uploaded the file to the mobile. Everything still works. Lastly, went and changed the Tone Mode from TSQL to Tone and saved the file. Went and changed it back to TSQL and saved the file. Uploaded the file to the mobile. PL decode not working for Ch 5, although it still works for the other TSQL channels.

Sorry about that! This is using Ver 20160513
I removed all other freqs from the file, except channels 4 and 5. I used a HT on simplex 146.565 for the xmit.

1. DL'd the file and removed all non-relevant freqs. Saved as "Good.img"
2. UL'd the file to mobile and checked that all still worked. It did as it should on Ch 5 (shows activity, no audio but hear audio on Ch 4).
3. Closed Chirp.
   
4. Opened Chirp. Went to open "Good.img" and received "Detection Failed" message, and I selected my Anytone mobile (happens every time I want to open my Anytone files).
5. Uploaded file to radio to see if it still worked, and it did.
6. Changed just the "Tone Mode" of Ch 5 to "Tone" and saved file.
7. Changed just the "Tone Mode" of Ch 5 back to "TSQL" and saved file.
8. Uploaded file to radio. Decode no longer works...hearing audio.

Rick

Not dead, this is still open and will be looked at if one of the developers takes it.

See #1491.