New Model #9821
closedBF-T20 Baofeng
Added by Galen Thurber about 2 years ago. Updated 4 months ago.
100%
Description
does not download using BF888
model CE certification Dec 2021
Files
retevis_rt22 - t20.py (21.9 KB) retevis_rt22 - t20.py | choose Baofeng T-20 | Jim Unroe, 12/15/2023 01:31 PM | |
radtel_t18 - t20_frs.py (47.2 KB) radtel_t18 - t20_frs.py | choose Baofeng T-20FRS | Jim Unroe, 12/15/2023 01:32 PM |
Updated by Jim Unroe about 2 years ago
- Status changed from New to Feedback
Hi Galen,
Does the BF-T20 work with the factory BF-888S programming software? I would suggest that you try the factory programming software first. If that works, then that would rule out many programming cable issues. If it doesn't work, then you most likely have a programming cable/driver/connection issue.
Also, the BF-T20 looks more like a Retevis RT22 style radio (with many variants such as WLN KD-C1) than a BF-888. Assuming that you don't have a programming cable issue, I would try Retevis RT22 or similar model.
After a little googling, I download the "factory" BF-T20 programming software from the "ABREE website's Download area":https://www.abbree.cn/download/. I see that the installer says "Welcome to the installer for KD-C1 1.0", so my guess above should be correct. You would program the Baofeng BF-T20 using the WLN / KD-C1 vendor/model selections. Confirm this and I will add the BF-T20 to the CHIRP Supported Radio Models list on the CHIRP home page.
Jim KC9HI
Updated by Galen Thurber about 2 years ago
Jim Unroe wrote:
Hi Galen,
Does the BF-T20 work with the factory BF-888S programming software? I would suggest that you try the factory programming software first. If that works, then that would rule out many programming cable issues. If it doesn't work, then you most likely have a programming cable/driver/connection issue.
Also, the BF-T20 looks more like a Retevis RT22 style radio (with many variants such as WLN KD-C1) than a BF-888. Assuming that you don't have a programming cable issue, I would try Retevis RT22 or similar model.
After a little googling, I download the "factory" BF-T20 programming software from the "ABREE website's Download area":https://www.abbree.cn/download/. I see that the installer says "Welcome to the installer for KD-C1 1.0", so my guess above should be correct. You would program the Baofeng BF-T20 using the WLN / KD-C1 vendor/model selections. Confirm this and I will add the BF-T20 to the CHIRP Supported Radio Models list on the CHIRP home page.
Jim KC9HI
Thank you,
I got rid of my last windows install this morning,
Only Linux now.
On chirp I did try all BF & Retevis download options, no luck
Cable has worked recently.
Updated by Victor Diaz about 1 year ago
Works with Zastone ZT-X6. I just tried it today
Updated by Stef Pletinck about 1 year ago
The same settings also apply to the W31, could we perhaps get those notes added to the supported radios list?
Updated by Pablo Escobar 8 months ago
works with WLN KD-C1
CHIRP version daily-20220620
Updated by Jim Unroe 4 months ago
- File retevis_rt22 - t20.py retevis_rt22 - t20.py added
- File radtel_t18 - t20_frs.py radtel_t18 - t20_frs.py added
- Status changed from Feedback to In Progress
- Assignee set to Jim Unroe
- Target version set to chirp-py3
- I read the instructions above set to Yes
There appears to be at least 2 versions of the Baofeng BF-T20.
1 A 16-channel UHF model (full-band TX/RX)
2 A 22-channel FRS model (with FCC ID and limited to only FRS frequencies by firmware)
I have developed test drivers for each and have attached them to this issue. Actually the second test driver ( radtel_t18 - t20_frs.py ) supports both radio models. Please test and report back your results. Here is how: LoadingTestModules
Updated by Anonymous 4 months ago
- Status changed from In Progress to Closed
- % Done changed from 0 to 100
Applied in changeset github|2f64333e2afe161d8e8fc6bacfc9dccee2ea119d.
Updated by Anonymous 4 months ago
- Status changed from In Progress to Closed
Applied in changeset github|94e3c5d3db8b567d619870653e924a4d7efad367.