New Model #7135: Yaesu FT-450 (not FT-450D) - CHIRP

Custom queries

All CHIRP-next Bugs
All CHIRP-next Feature Requests
All closed issues
All open issues
New Model Requests
Open bugs by Developer
Open bugs by Target Version
Potentially Stalled Bugs

New Model #7135

closed

Yaesu FT-450 (not FT-450D)

Added by Tony Corbett about 5 years ago. Updated 12 months ago.

Status:

Closed

Priority:

Normal

Assignee:

Category:

Target version:

chirp-py3

Start date:

09/30/2019

Due date:

% Done:

Estimated time:

Equipment Loan/Gift Offered:

I read the instructions above:

Yes

Description

Please add FT-450.

FT-450D driver does not work with original FT-450.

Related issues 2 (0 open — 2 closed)

Related to Bug #7839: Yaesu FT-450D

Closed

04/29/2020

Actions

Has duplicate New Model #7555: Cannot clone FT-450 (NON-D model)

Closed

01/13/2020

Actions

Issue # Delay: days Cancel

History
Notes
Property changes

Actions

Copy link

Updated by Bernhard Hailer almost 5 years ago

Subject changed from FT-450 to Yaesu FT-450 (not FT-450D)
Target version set to chirp-legacy

Actions

Copy link

Updated by Bernhard Hailer almost 5 years ago

Status changed from New to Closed

-Request already made, see #7135.-

Actions

Copy link

Updated by Bernhard Hailer over 3 years ago

Status changed from Closed to Feedback

The previous comment introduced a reference to itself, sorry for that. Reopening.
There is a possible solution (a firmware upgrade) suggested in #7839; please check and see whether it helps.

Actions

Copy link

Updated by Tony Corbett over 3 years ago

Bernhard Hailer wrote:

The previous comment introduced a reference to itself, sorry for that. Reopening.
There is a possible solution (a firmware upgrade) suggested in #7839; please check and see whether it helps.

#7839 is referencing the FT-450D model. The FT-450D firmware will not work on a non-D model.

Actions

Copy link

Updated by Bernhard Hailer over 3 years ago

Thanks for the comment. We will leave this ticket open.

Actions

Copy link

Updated by Rick DeWitt over 3 years ago

As the originator of the FT-450D driver, I would love to add non-D model support. However, nobody in my local area has one to borrow. If Tony is willing to do some USB capture with the Yaesu PCC-450 software then we could try it.
PCC S/W link: https://www.yaesu.com/downloadFile.cfm?FileID=8353&FileCatID=42&FileName=PCC%2D450%5FV113.zip&FileContentType=application%2Fx%2Dzip%2Dcompressed
Since the radio has CAT support, I could also try to make a live-mode driver version. That would allow memory channel edits.

Actions

Copy link